Cabinet Construction

DOOR FRAME

Consist of ¾" solid oak, ¾" solid maple or white thermafoil over ¾" thick furniture board. Door insert panels are oak plywood on two sides, maple plywood on two sides, oak membrane raised panel, or white thermafoil raised panel.

HINGES

Concealed and are fully adjustable in all directions.

FACE FRAME

Manufactured from three-quarter-inch-thick select kiln-dried hardwoods on oak and maple cabinets and wood frames for white cabinetswith one-and-one-half-inch stiles and rail and three-inch-wide center braces. Frames are glued and pocket screwed under pressure for maximum strength and squareness.

END PANELS

Base cabinets are one-half-inch-thick wood substrate (furniture board) with woodgrain, white or print on the exterior and maple, or white print on the interior. Wall end panels are wood substrate (furniture board) with a woodgrain or white print exterior also, but have white interiors on white cabinets and maple interiors on all woodgrain cabinets. Wall cabinet end panels are edgebanded top and bottom.

CABINET TOPS AND BOTTOMS

One-half-inch wood substrate (furniture board) with woodgrain or white print and are dadoed into sides for maximum strength.

CABINET BACKS

One-eighth-inch hardboard with woodgrain or white print and have one-half-inch thick nailer boards at tops and bottoms.

SHELVES

Where provided, all wall and base cabinets have 5/8" thick adjustable shelves with locking support brackets.


Drawer Construction

SIDES, FRONTS, AND BACKS

All Pace kitchen drawers are clear finished hardwood. Sides are rabbetted, glued, and pinned to drawer box front and back.

BOTTOMS

Woodgrain printed and dadoed into all four sides.

VISUAL DRAWER FRONT

Screwed to drawer box.

GLIDES

European-style epoxy coated have a smooth, silent glide, self-closing feature.


Assembly

All parts are precision machined and then glued, screwed and stapled together. Styrene angle braces or wooden support blocks are used at all stress points to add rigidity to the case.


Finish

A durable six-step environmentally friendly waterborne furniture finish is used on all hardwood parts. White thermofoil doors and drawer fronts have a durable satin finish.


Characteristics of Wood Finishes

All woods vary in grain, texture, and color. Wood is a product of nature. Natural wood from each tree varies in grain pattern, density and color. The effect of nature's original beauty on the final color is considered to be the distinctive character so highly sought after for generations. Color match and grain variation will vary due to the material characteristics and should not be considered defective.


Limited Warranty

Pace Industries, Inc. warrants its products to the original purchaser for a period of one year from date of purchase. This waranty does not cover installation, negelect, misuse, improper storage, or abuse. Pace Industries, Inc. will not assume, nor will it authorize any person to assume for us, any liability in connection with sale of Pace Industries, Inc. products. This warranty is in lieu of all other warranties expressed or implied. Pace Industries, Inc. reserves the right to change design specifications and material as conditions dictate and to make ongoing improvements in its products. Pace Industries, Inc. has no obligation to incorporate such changes into products that have been previously manufactured.